-- River Rooks nvim config

-- [[setup]]
vim.g.mapleader = ' '
vim.g.maplocalleader = ' '
-- Set to true if you have a Nerd Font installed and selected in the terminal
vim.g.have_nerd_font = false


vim.g.netrw_liststyle = 3
vim.g.netrw_banner = 1
vim.g.netrw_altv = 1 -- Create the split of the Netrw window to the left
vim.g.netrw_winsize = 30 -- Set the width of the "drawer"
vim.g.netrw_browse_split = 4 -- Open files in previous window. This emulates the typical "drawer" behaviorkjk

-- [[Setting options]]
-- See `:help vim.o`
-- NOTE: You can change these options as you wish!
--  For more options, you can see `:help option-list`
-- Make line numbers default
vim.o.number = true
-- You can also add relative line numbers, to help with jumping.
--  Experiment for yourself to see if you like it!
vim.o.relativenumber = true
-- Don't show the mode, since it's already in the status line
vim.o.showmode = false
-- Sync clipboard between OS and Neovim.
--  Schedule the setting after `UiEnter` because it can increase startup-time.
--  Remove this option if you want your OS clipboard to remain independent.
--  See `:help 'clipboard'`
vim.schedule(function()
  vim.o.clipboard = 'unnamedplus'
end)
-- Enable break indent
-- Save undo history
vim.o.undofile = true
-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
vim.o.ignorecase = true
vim.o.smartcase = true
-- Keep signcolumn on by default
vim.o.signcolumn = 'yes'
-- Decrease update time
vim.o.updatetime = 250
-- Decrease mapped sequence wait time
vim.o.timeoutlen = 300
-- Configure how new splits should be opened
vim.o.splitright = true
vim.o.splitbelow = true
vim.o.list = true
vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
-- Preview substitutions live, as you type!
vim.o.inccommand = 'split'
-- Show which line your cursor is on
vim.o.cursorline = true
-- Minimal number of screen lines to keep above and below the cursor.
vim.o.scrolloff = 25
-- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
-- instead raise a dialog asking if you wish to save the current file(s)
-- See `:help 'confirm'`
vim.o.confirm = true
-- [[Keybinds]]
--  See `:help vim.keymap.set()`
--  See `:help hlsearch`
vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
-- Diagnostic keymaps
vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })

vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })

-- TIP: Disable arrow keys in normal mode
vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')

-- Keybinds to make split navigation easier.
--  Use CTRL+<hjkl> to switch between windows
--
--  See `:help wincmd` for a list of all window commands
vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })

-- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes
vim.keymap.set("n", "<C-S-h>", "<C-w>H", { desc = "Move window to the left" })
vim.keymap.set("n", "<C-S-l>", "<C-w>L", { desc = "Move window to the right" })
vim.keymap.set("n", "<C-S-j>", "<C-w>J", { desc = "Move window to the lower" })
vim.keymap.set("n", "<C-S-k>", "<C-w>K", { desc = "Move window to the upper" })

-- [[ Basic Autocommands ]]
vim.api.nvim_create_autocmd('TextYankPost', {
  desc = 'Highlight when yanking (copying) text',
  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
  callback = function()
    vim.hl.on_yank()
  end,
})
-- [[scripts]]
-- Bootstrap lazy.nvim
local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
if not (vim.uv or vim.loop).fs_stat(lazypath) then
  local lazyrepo = "https://github.com/folke/lazy.nvim.git"
  local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
  if vim.v.shell_error ~= 0 then
    vim.api.nvim_echo({
      { "Failed to clone lazy.nvim:\n", "ErrorMsg" },
      { out, "WarningMsg" },
      { "\nPress any key to exit..." },
    }, true, {})
    vim.fn.getchar()
    os.exit(1)
  end
end
vim.opt.rtp:prepend(lazypath)

-- Make sure to setup `mapleader` and `maplocalleader` before
-- loading lazy.nvim so that mappings are correct.
-- This is also a good place to setup other settings (vim.opt)
vim.g.mapleader = " "
vim.g.maplocalleader = "\\"

-- Setup lazy.nvim
require("lazy").setup({
  spec = {
    -- import your plugins
    { import = "plugins" },
  },
  -- Configure any other settings here. See the documentation for more details.
  -- colorscheme that will be used when installing plugins.
  install = { colorscheme = { "retrobox" } },
  -- automatically check for plugin updates
  checker = { enabled = true },
},
{
  ui = {
    -- If you are using a Nerd Font: set icons to an empty table which will use the
    -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
    icons = vim.g.have_nerd_font and {} or {
      cmd = '⌘',
      config = '🛠',
      event = '📅',
      ft = '📂',
      init = '⚙',
      keys = '🗝',
      plugin = '🔌',
      runtime = '💻',
      require = '🌙',
      source = '📄',
      start = '🚀',
      task = '📌',
      lazy = '💤 ',
    },
  },
})